skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Crankshaft, Piston and Conrod > < Removing and installing sealing flange and two-mass flywheel

Yeti

Removing and installing V-ribbed belt for vehicles without air conditioning system
Removing and installing V-ribbed belt for vehicles without air conditioning system
(Octavia II, Yeti)
  Note
The repair kit includes the V-ribbed belt, the assembly tool -T10367- and an illustrated work procedure → Electronic Catalogue of Original Parts.
Removing
–  Remove the sound dampening system → Body Work; Rep. gr.50.
–  Remove the right wheelhouse liner → Body Work; Rep. gr.66.
–  Cut through V-ribbed belt.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  The following work procedure is described in the illustrated work procedure from the repair kit.
–  Start engine and check ribbed V-belt run.
   

Crankshaft, Piston and Conrod > < Removing and installing sealing flange and two-mass flywheel