Workshop Manuals Factory service & repair Suzuki
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Suzuki Grand Vitara JS 2WD V6-2.5L (1999)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Locations

Make
Suzuki
Model
Grand Vitara JS 2WD
Engine
V6-2.5L
Year
1999
Section
Vehicle Lifting › Locations
MaintenanceLocations · page 1 of 3
background image

Vehicle Lifting: Locations

VEHICLE LIFTING POINTS

WARNING:

-

When using frame contact hoist, apply hoist as shown (right and left at the same position). Lift up the vehicle till 4 tires are a little off the
ground and make sure that the vehicle will not fall off by trying to move vehicle body in both ways. Work can be started only after this
confirmation.

-

Before applying hoist to underbody, always take vehicle balance throughout service into consideration. Vehicle balance on hoist may
change depending of what part to be removed.

-

Make absolutely sure to lock hoist after vehicle is hoisted up.

-

Before lifting up the vehicle, check to be sure that end of hoist arm is not in contact with brake pipe, fuel pipe, bracket or any other part.

WHEN USING FRAME CONTACT HOIST

WHEN USING FLOOR JACK

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 1999 Suzuki Grand Vitara 2.5L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.