XL-7 2WD V6-3.6L (2007)
3. Install the shift control cable to the shift control.
4. Install the shift control cable onto the shift control range select lever pin.
5. Install the console.
6. Install the shift control lever knob.
7. Install 11 the shift control cable (2) to the shift control cable bracket (3). Ensure the shift control cable retaining tabs fully engage the shift control
cable bracket.
8. Connect the shift control cable (1) to the transaxle range switch lever (4).
9. Install the battery tray.
10. Adjust the shift control cable.
11. Enable the supplemental inflatable restraint (SIR) system.
12. Release the parking brake.
