XL-7 2WD V6-3.6L (2007)
Shift Cable: Service and Repair
Shift Control Cable Bracket Replacement
Shift Control Cable Bracket Replacement
Special Tool
J 36346 Fascia Retainer Remover
Removal Procedure
1. Remove the battery tray.
2. Using the J 36346, disconnect the shift control cable (1) from the transaxle range switch lever (4).
3. Depress the shift control cable retainer clip tabs (2) and remove the shift control cable from the shift control cable bracket (3).
4. Remove the shift control cable bracket bolts.
5. Remove the shift control cable bracket.
Installation Procedure