toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

All Other Service Bulletins for Tape Player: > < Audio - Cassette Will Not Eject
Page 1
background image

Tape Player: All Technical Service Bulletins
Audio - Tape Will Not Eject From the Cassette Deck

REFERENCE:

ELECTRICAL

NUMBER:

001

DATE:

07-10-87

MODEL:

ALL

TITLE ELECTRONIC TUNE RADIO COMBO WITH LOGIC CASSETTE DECK

Condition:

Cassette tape will not eject from the cassette deck.

Cause:

A momentary jamming or sticking of the cassette tape during the eject mode might cause the logic circuit to become confused.

Reset the logic circuit by performing the following procedures:

1 .

Remove power to the radio by disconnecting the negative battery cable at
the battery post.

2.

Wait 30 seconds and reconnect battery.

3.

Turn the radio on and press the stop (eject) button. (Tape should come out by itself).

4.

If the tape does not come out, check to see if something has fallen in or on top of the tape preventing the mechanism from pushing the tape
out.

If this condition still exists, please refer to the corrections below:

Correction:

^

Replace the radio assembly with exchange unit.

^

If you have any questions about this condition, please contact the following authorized exchange station.

PANASONIC

Exchange Only

6550 Katella Avenue

(800) 423-8150 (Except Alaska)

Cypress, CA 90630

(714) 895-7456 (Alaska - Call Collect)

(714) 895-7456

Service help/Consultation
(800) 367-7689 (California Only) (714) 895-7456 (All Others - Call Collect)

All Other Service Bulletins for Tape Player: > < Audio - Cassette Will Not Eject