Camry Sedan L4-2.0L (3S-FE) (1987)
Timing Belt: Service and Repair
Timing Belt Installation
INSTALLATION OF TIMING BELT
1. INSTALL OIL PUMP PULLEY
(a) Align the cutouts of the pulley and shaft, and slide the pulley.
(b) Using SST, install and torque the nut. SST 09616-30011
Torque: 290 kg-cm (21 ft-lb. 28 Nm)
2. INSTALL CRANKSHAFT TIMING PULLEY
Align the pulley set key with the key groove of the pulley. and slide the pulley.
3. INSTALL NO.2 IDLER PULLEY
(a) Install the pulley with the bolt. Torque the bolt.
Torque: 425 kg-cm (31 ft-lb, 42 Nm)
(b) Check that the pulley moves smoothly.
NOTE: Remove any oil water on the idler pulley and keep it clean.