Camry Sedan L4-2.0L (3S-FE) (1987)
4. TEMPORARILY INSTALL NO.1 IDLER PULLEY AND TENSION SPRING
(a) Install the pulley with the bolt. Do not tighten the bolt yet.
(b) Install the tension spring.
(c) Pry the pulley toward the left as far as it will go and tighten the bolt.
5. TEMPORARILY INSTALL TIMING BELT
CAUTION: The engine should be cold.
Install the timing belt on the crankshaft timing, oil pump, No.2 idler and water pump pulleys.
NOTE: If reusing the timing belt, align the points marked during removal, and install the belt with the arrow pointing in the direction of engine
revolution.
6. INSTALL TIMING BELT GUIDE
Install the guide, facing the cup side outward.