Camry Sedan L4-2.0L (3S-FE) (1987)
7. INSTALL NO.1 TIMING BELT COVER
(a) Install the gasket to the belt cover.
(b) Install the belt cover with the four bolts.
8. INSTALL CRANKSHAFT PULLEY
(a) Align the pulley set key with the key groove of the pulley, slide the pulley.
(b) Using SST, install and torque the the bolt. SST 09213-54014 and 09330-00021
Torque: 1.100 kg-cm (80 ft-lb. 108 Nm)
9. INSTALL CAMSHAFT TIMING PULLEY
(a) Align the camshaft knock pin with the knock pin groove of the pulley, and slide the pulley.
(b) Using SST. install the plate washer and bolt.
Torque the bolt. SST 09278-54012
Torque: 550 kg-cm (40 ft-lb. 54 Nm)
10. SET NO.1 CYLINDER TO TDC/COMPRESSION
(a) Turn the crankshaft pulley. and align the its groove with the "0" timing mark of the No.1 timing belt cover.