Camry Wagon L4-2.0L (3S-FE) (1990)
7-2.
(GKN TYPE)
ASSEMBLE BOOT CLAMPS TO BOTH BOOT
(a) Be sure the boot (large side) is on shaft groove.
(b) Using a boot clamp tool, place pincer jaws in closing hooks of large clamp.
(c) Secure clamp by drawing closing hooks together.
(d) Check that the clamp at closed position is the same as in the image.
(e) Be sure the boot (small side) is on the shaft groove.
(f) Using a boot clamp tool, tighten the clamp.