Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
deviation exceeds the maximum, replace the axle hub.
f.
Install the disc and caliper.
[torque: 88 Nm (65 ft. lbs.)].
5. Remove drive shaft lock nut.
a. Remove the cotter pin and lock nut cap.
b. With applying the brakes, remove the nut.
[torque: 216 Nm (159 ft. lbs.)].
c. Remove the brake caliper and disc.
[torque: 88 Nm (65 ft. lbs.)].
6. Loosen 2 nuts on lower side of shock absorber.
[torque: 275 Nm (203 ft. lbs.)].
Removal Note: Do not remove the 2 nuts and bolts.
7. Disconnect tie rod end from steering knuckle.
a. Remove the cotter pin and nut.
[torque: 49 Nm (36 ft. lbs.)].
b. Using Special Service Tool (SST) 09628 - 62011, disconnect the tie rod end from the steering knuckle.
8. Disconnect lower ball joint from lower suspension arm by removing the bolt and 2 nuts.
[torque: 142 Nm (105 ft. lbs.)].