Corolla Sedan 4-Door L4-1587cc 1.6L DOHC MFI (1997)
9. Remove steering knuckle with axle hub.
a. Remove the 2 nuts and a bolts on the lower side of the shock absorber.
Installation Note: Coat the nut's threads with engine oil.
b. (b) Remove the steering knuckle with the axle hub.
CAUTION: Be careful not to damage the boot, oil seal and speed sensor rotor.
10. Install in reverse order of removal, noting the torque specifications in brackets [ ]. See TSB DL001-98 3-6-98
11. After installation, check the ABS speed sensor signal and front wheel alignment.