FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
![background image](/toyota/fj_cruiser_4wd/v6-4.0l_(1gr-fe)/Page-897006.png)
(g) Align the matchmarks on the flange yoke and the sleeve yoke.
(h) Using SST, install the spider bearings onto the spider.
SST 09332-25010
(i)
Using SST, adjust both bearings so that the snap ring grooves are at maximum and equal in width.
SST 09332-25010
(j)
Install 4 new snap rings of equal thickness which will allow no axial play.
HINT: Do not reuse the snap rings.
Thickness of snap ring
NOTICE:
^
Use a new snap ring.
^
Use snap rings as close as possible to the same thickness on both ends.