CAUTION / NOTICE / HINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Make
- Toyota
- Model
- Hilux Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
- Section
- .pdf › CAUTION / NOTICE / HINT - Toyota Hilux AN120/AN130 2015-2018 Workshop Manual
CAUTION / NOTICE / HINT

FRONT SUSPENSION FRONT LOWER SUSPENSION ARM(for 4WD and Pre-Runner) INSTALLATION
CAUTION / NOTICE / HINT
HINT:
· Use the same procedure for the RH and LH sides.
· The procedure listed below is for the LH side.
PROCEDURE
48304
1.INSTALL FRONT NO. 1 SPRING BUMPER SUB-ASSEMBLY
a.

*a Torque Wrench Fulcrum Length
Using SST, install the front spring bumper to the vehicle. Torque: Specified tightening torque : 31 N*m (316 kgf*cm, 23 ft.*lbf)
HINT:
· Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.
· When using SST (fulcrum length of 69.68 mm (2.7433 in.)) + torque wrench (fulcrum length of 300 mm (11.8110 in.)): 25.2 N*m (257 kgf*cm, 19 ft.*lbf)
43340A
2.INSTALL FRONT LOWER BALL JOINT ASSEMBLY LH
Parts & tools for this job For Toyota Hilux
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Toyota Hilux
As an Amazon Associate we earn from qualifying purchases.