38261E.pdf - REMOVE CLIP - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Body › 38261E.pdf - REMOVE CLIP - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - REMOVE CLIP

— Front Door BODY BO-6 URS. 11, (w/o Ventilator Window type)
REMOVE CLIP
00983
12,
REMOVE DOOR GLASS
(a) (w/o ventilator window type) Remove two glass channel mounting bolts. (b) Incline the door glass and pull it upward.
800984
13,
REMOVE WINDOW REGULATOR
(w/o ventilator window type) (a) Remove the two equalizer arm bracket mounting bolts. (b) (w/ power window) Disconnect the connector from the motor and remove the four bolts.
(w/o power window)
Remove the three bolts, (c) Remove the regulator through the service hole.
(w/o Ventilator Window type)
14,
REMOVE FRONT LOWER FRAME
(w/ soft top) Remove the two bolts and front lower frame. (w/o soft top) Remove the two screws, two bolts and front lower frame.
15.
REMOVE REAR LOWER FRAME
(w/ soft top)
Remove the two bolts and rear lower frame.
(w/o soft top)
Remove the bolt and rear lower frame.
16.
DISCONNECT INSIDE LOCKING CONTROL LINK
FROM DOOR LOCK
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Toyota touch up paint
- PARTPanel clip assortmentSearch: Toyota panel clips assortment
As an Amazon Associate we earn from qualifying purchases.