38261E.pdf - SNUG DOWN GLASS - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Body › 38261E.pdf - SNUG DOWN GLASS - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - SNUG DOWN GLASS

BO-25 BODY — Windshield Begin installation in the middle of the lower part
NOTE: of the glass, (b) Hold the glass in position on the body.

1592 From the inside, pull on one cord at an angle so it (c) pulls the lip over the flange. From the outside, press the glass along the weatherstrip until the glass is in- stalled.
M2383
4.
SNUG DOWN GLASS
To snug down the glass, tap from the outside with your open hand.
5.
APPLY ADHESIVE
(a) Put masking tape around the weatherstrip to protect the paint and glass.

2302 (b) Apply adhesive to the No. 1 weatherstrip lip and glass lip until it oozes out. y Glass Lip
No. 1 Lip
\g
M1007
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Toyota touch up paint
- PARTPanel clip assortmentSearch: Toyota panel clips assortment
As an Amazon Associate we earn from qualifying purchases.