= ., Headlight Control Relay - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Body Electrical System › = ., Headlight Control Relay - Toyota Land Cruiser J70 Workshop Manual
= ., Headlight Control Relay


BODY ELECTRICAL SYSTEM — Lighting
(f) Place the ball on the spring, position the lever at HI and install the plate.

8E0715 7 (g) Insure that the switch operates smoothly. (h) Install the terminals to the connector. (See page BE-3)

= ., Headlight Control Relay
INSPECTION OF HEADLIGHT CONTROL
Continuity
No continuity
RELAY i c

1.
INSPECT RELAY CONTINUITY
(a) Check that there is continuity between terminals 1 and 2. (b) Check that there is no continuity between terminals 3 and 4. (c) Check that there is no continuity between terminals 1 and 4. 80229 If continuity is not specified, replace the relay.
2.
INSPECT RELAY OPERATION
No continuity (a) Apply battery voltage across terminals 1 and 2. (b) Check that there is continuity between terminals 3 and 4. (c) Check that there is no continuity between terminals 1 and 4. If operation is not as described, replace the relay.

80230]
No continuity
Continuity
Taillight Control Relay
INSPECTION OF TAILLIGHT CONTROL RELAY
1.
INSPECT RELAY CONTINUITY
(a) Check that there is continuity between terminals 1 and 2, (b) Check that there is no continuity between terminals 2 and 3. If continuity is not as specified, replace the relay.
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTReplacement bulbsSearch: Toyota Land Cruiser bulbs
- TOOLDigital multimeterSearch: automotive digital multimeter
As an Amazon Associate we earn from qualifying purchases.