38261E.pdf - INSPECT RELEASE BEARING - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Clutch › 38261E.pdf - INSPECT RELEASE BEARING - Toyota Land Cruiser J70 Workshop Manual
38261E.pdf - INSPECT RELEASE BEARING

CLUTCH — Clutch Unit CL-11
INSPECT RELEASE BEARING
Turn the bearing by hand while applying force in the rota- tion direction. \f bearing sticks or has much resistance, replace the release bearing.
NOTE: The bearing is permanently lubricated and re- quires no cleaning or lubrication.
82020
IF NECESSARY, REPLACE RELEASE BEARING
(a) Using a press and SST, press the release bearing from the hub. SST 09315-00010
cL014s Using a press and SST, press a new release bearing (b) into the hub. SST 09315-00021
After installing the bearing, check that there is no
(c) drag on the bearing when it is turned under pressure.
10146
INSTALLATION OF CLUTCH UNIT

(See page CL-8)
INSTALL DISC ON FLYWHEEL
1. Using SST, install the disc on the flywheel. SST 09301-20020
CL0021 cLooz2
INSTALL CLUTCH COVER

-Align the marks on the clutch cover and flywheel.
(a)
Tighten the bolts evenly. Make several passes around
(b) the cover until it is snug. Torque the bolts. 195 kg-cem (14 ft-lb, 19 N-m) Torque:

1.0023
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTClutch kitSearch: Toyota Land Cruiser clutch kit
- TOOLClutch alignment toolSearch: clutch alignment tool
- FLUIDGear oilSearch: Toyota Land Cruiser manual gearbox oil
As an Amazon Associate we earn from qualifying purchases.