Trailing Arm - Toyota Land Cruiser J70 Workshop Manual
- Make
- Toyota
- Model
- Land Cruiser Toyota Land Cruiser J70 Workshop Manual
- Section
- Rear Axle Suspension › Trailing Arm - Toyota Land Cruiser J70 Workshop Manual
Trailing Arm

REAR AXLE AND SUSPENSION — Rear Suspension RA-32
Trailing Arm
(See page RA-31)
REMOVAL OF TRAILING ARM
]
1.
SUPPORT TRAILING ARM
Using a jack, support the trailing arm.
2.
REMOVE TRAILING ARM
(a) Remove the front mounting nut, retainer and cush- ion.
(b) Remove the two rear mounting nuts and bolts from the axle housing. (c) Lower and remove the trailing arm. (d) Remove the cushion and retainer from the trailing arm.

RA0637
INSTALLATION OF TRAILING ARM
1,
REPLACE TWO TRAILING ARM BUSHINGS
(a) Using SST, press out the bushing. SST 09710-30030 and 09228-22020
(b) Using SST, press in the bushing. SST 09710-30030 and 09228-22020
NOTE: When assembling the bushing, assemble it so the its holes align at a 45° angle.
A0639_
Donated by Onur Azeri . cruisercult.com
Parts & tools for this job For Toyota Land Cruiser
- PARTRear wheel bearingSearch: Toyota Land Cruiser rear wheel bearing
- TOOLBearing puller kitSearch: wheel bearing puller kit
- PARTCV boot kitSearch: Toyota Land Cruiser cv boot kit
As an Amazon Associate we earn from qualifying purchases.