Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
1. REMOVE CENTER PILLAR UPPER END WEATHERSTRIP
Using a screwdriver, remove the weatherstrip.
HINT: Tape the screwdriver tip before use.
2. REMOVE ROOF SIDE RAIL WEATHERSTRIP
Using SST, pull off the roof side rail weatherstrip from end.
SST 09806-30010
HINT: At the time of installation, please refer to the following item.
Attach the upper edge of the weatherstrip to body flange. Tap on the weatherstrip by hand.
INSTALLATION
Installation is in the reverse order of removal.