Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
Upper Side Moulding / Trim: Service and Repair
Roof Drip Side Moulding
Roof Drip Side Moulding
COMPONENTS
REMOVAL
1. w/ Roof rack: REMOVE ROOF RACK
2. REMOVE ENDS OF ROOF DRIP SIDE MOULDING
a. Apply protective tape to the outer surface to keep the surface from being scratched.
b. Using a heat light, heat the moulding to 20 - 30 °C (68 - 86 °F).