Sequoia LTD 4WD V8-4.7L (2UZ-FE) (2001)
2. REMOVE CUSHION
3. REMOVE PEDAL ASSEMBLY
(a) Remove the nut, bolt and pedal assembly.
Torque: 32 Nm (320 kgf-cm, 23 ft. lbs.)
(b) Remove the 2 bushings from the pedal assembly.
(c) Remove the pedal pad.
4. REMOVE PARKING BRAKE SWITCH
Remove the screw and parking brake switch.
REASSEMBLY
Reassembly is in the reverse order of disassembly.
NOTICE: Apply lithium soap base glycol grease to the parts indicated by the arrows.
INSTALLATION
Installation is in the reverse order of removal.
HINT: After the installation, check and adjust parking brake pedal travel.