Sienna FWD V6-3.3L (3MZ-FE) (2006)
a. Coat the installation part of the stoppers with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
-
Do not apply too much Primer.
b. Install 2 new stoppers onto the glass, as shown in the illustration.
2. INSTALL WINDSHIELD GLASS NO.1 STOPPER
a. Install 2 new stoppers to the vehicle body, as shown in the illustration.