Sienna FWD V6-3.3L (3MZ-FE) (2006)
d. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
HINT: If the area other than that specified is coated by accident, wipe off the primer with a clean shop rag before it dries.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
e. Apply adhesive (Adhesive: Part No.08850-00801 or equivalent).
1. Cut off the tip of the cartridge nozzle, as shown in the illustration.