T100 Pickup 2WD V6-3.4L (5VZ-FE) (1996)
20. Remove timing belt.
21. Remove RH camshaft timing pulley.
(a) Using SST 09960-10010 (09962-01000, 09963-01000), loosen the pulley bolt.
(b) Remove the bolt, knock pin and camshaft timing pulley with timing belt.
22. Remove LH camshaft timing pulley.
(a) Using SST 09960-10010 (09962-01000, 09963-01000), loosen the pulley bolt.
(b) Remove the bolt, knock pin and camshaft timing pulley.
23. Remove No.2 idler pulley.
Remove the bolt and No.2 idler pulley.
24. Remove No.1 idler pulley.
Using a 10 mm hexagon wrench, remove the pivot bolt, No.1 idler pulley and plate washer.
25. Remove crankshaft timing pulley.
HINT: If the pulley cannot be removed by hand, use SST and service bolt to remove the crankshaft timing pulley.
SST 09950-50010 (09951-05010, 09952-05010, 09953-05020, 09954-05010)