Tundra 2WD V6-4.0L (1GR-FE) (2005)
e. Disconnect the connector (yellow colored one) from the front seat airbag assembly LH.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.
f.
Install the SST.
1. Connect the connectors of the SST to the airbag connector.
SST 09082-00700, 09082-00750
NOTE: To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.
2. Move the SST at least 10 m (33 ft) away from the vehicle side window.
3. Maintaining enough clearance for the SST wire harness in the front side window, close all doors and windows of the vehicle.
NOTE: Take care not to damage the SST wire harness.
4. Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.