Tundra 2WD V6-4.0L (1GR-FE) (2005)
g. Deploy the airbag.
1. Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
2. Press the SST activation switch and deploy the airbag.
CAUTION:
-
When deploying the airbag, make sure that no one is near the vehicle.
-
The front seat airbag assembly becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
-
Use gloves and safety glasses when handling a front seat airbag assembly with a deployed airbag.
-
Do not apply water, etc. to a front seat airbag assembly with a deployed airbag.
-
Always wash your hands with water after completing the operation.
HINT: The airbag deploys as the LED of the SST activation switch comes on.
2. DEPLOYMENT WHEN DISPOSING OF SIDE AIRBAG ASSEMBLY
NOTE:
-
When disposing of the side airbag assembly, never use the customer's vehicle to deploy the airbag.
-
Be sure to follow the procedure given below when deploying the airbag.
HINT: Prepare a battery as the power source to deploy the airbag.
a. Check the function of the SST (see step 1-(a)).
SST 09082-00700
CAUTION: When deploying the airbag, always use the specified SST: SRS Airbag Deployment Tool.