Oil Temperature Sensor, Remove and Install
Remove
Remove lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Remove oil drain bolt – collect escaping engine oil.
Disconnect wiring harness plug (1) from oil temperature
sensor.
Detach oil temperature sensor from upper part of oil pan.
|
|
Install
Attach oil temperature sensor with new seal ring to upper part
of oil pan – tightening torque 18 Nm / 13 lbf. ft.
Connect wiring harness plug to oil temperature sensor.
Install oil drain bolt in lower part of oil pan with new seal
ring – tightening torque – 10 Nm / 7.5 lbf. ft.
Install lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Fill with prescribed oil quantity.
|