vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

B-006 Check: Airbag Status > < B-004 No Matching Customer Complaint

B-005 - ADDITIONAL FUNCTIONS

Test

Work Order Description

Nominal Value

T001 Tester Display Read ECU Identification
  • Ignition ON
  • Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Displayed value okay?

Concerned Terminals:
-
Yes: No:
T002 Tester Display Read Variant Configuration
  • Ignition ON
  • Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Displayed value okay?

Concerned Terminals:
-
Yes: No:
T003 Tester Display Seat Belt Reminder Data
  • Ignition ON
  • Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

Depending on the vehicle/system configuration it is possible that this test, although it is listed in this checking procedure, is not shown on the diagnostic tester display. In that case, this test is not valid for this vehicle/system configuration.

Displayed value okay?

Concerned Terminals:
-
Yes: No:
T004 Tester Display Seat Occupied Detection
  • Ignition ON
  • Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Note:

Depending on the vehicle/system configuration it is possible that this test, although it is listed in this checking procedure, is not shown on the diagnostic tester display. In that case, this test is not valid for this vehicle/system configuration.

Displayed value okay?

Concerned Terminals:
38 (XC18)
Yes: No:
T005 Tester Display Clear Deployment Record
  • Ignition ON
  • Press corresponding key in the system main menu to call up Additional Functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.

Displayed value okay?

Concerned Terminals:
-
Yes: No:





B-006 Check: Airbag Status > < B-004 No Matching Customer Complaint