Replace Curtain Airbag (repair airbag) (not
deployed) - L08 from MJ 2007
Remove
1. |
Remove moulded headlining - L08 with panorama glass
Lower moulded headlining - L08 without panorama glass
Note: With L08 without
panoramic window, to remove the curtain airbag all the seats are
folded down and the moulded headlining merely dropped. The removal
of the windscreen is then not required!
|
2. |
Remove curtain airbag
Note: With already
replaced airbags, do not bend the clamps on positions 3 and 4.
• |
Release and disconnect wiring harness plug
|
|
|
|
Install
3. |
Install curtain airbag
• |
Tighten 8x bolts 1.5 Nm
|
• |
Connect and latch wiring harness plug
|
|
4. |
Attach curtain airbag in area of A-pillar (1)
|
5. |
Attach curtain airbag in area of C-pillar (2)
|
|
|
6. |
Install moulded headlining
Note: With L08 without
panorama glass, the removal and replacement of the windscreen is
not required.
- L08 without panorama glass
- L08 with panorama glass
|
|