Replace outside door handle bracket (rear
door)
Remove
1. |
Detach rear door inner panelling
|
2. |
Partly loosen water vapour barrier
• |
Loosen water vapour barrier in the area of the hatching
|
|
|
|
3. |
Detach front door panel
• |
Prise off panel (1) with a plastic wedge
|
|
|
|
|
4. |
Remove rear door fixed handle part
• |
Pull out and hold moveable handle part (I)
|
• |
Turn bolt (II) left until it stops
Note: Moveable handle
part must now be secured in pulled position.
|
• |
Remove fixed handle part with lock cylinder (IV)
|
|
5. |
Detach door handle
• |
Pull back moveable handle part (III) to remove
|
|
|
6. |
Bracket for door outer handle, Detach
|
|
|
Install
7. |
Bracket for door outer handle, Attach
|
8. |
Refit door handle
• |
Fit moveable handle part into door panel
|
|
9. |
Install rear door fixed handle part
• |
Pull out and hold moveable handle part
|
• |
Close moving part of handle
|
|
10. |
Attach front door panel
|
11. |
Attach water vapour barrier
|
12. |
Attach rear door inner panelling
|
|