Replace rear seat backrest pad (60 percent
section) - L08 / L35 / L48
Remove
1. |
Remove bench seat
• |
Unlock 2x brackets (1) front
|
• |
Hang off 2x bench seat from rear bracket
– |
Push seat simultaneously backwards and upward
|
|
|
|
|
2. |
Remove rear seat backrest
• |
Unscrew 2x bolts at the front
|
• |
Fold down rear seat backrest
|
• |
Unscrew 2x bolts at the back
|
|
|
|
3. |
Remove rear seat backrest
• |
Remove rear seat backrest from side guide
Note: 2nd mechanic
required.
|
|
|
|
4. |
Remove head restraints
|
5. |
Detach rear seat backrest cover
|
6. |
Detach left (1) and right (2) brackets
|
|
|
7. |
Detach upholstery covering all the way round
|
8. |
Detach head restraint guide sleeve
• |
Detach 4x head restraint guide sleeve with a suitable tool
|
|
10. |
Remove upholstery covering
• |
Detach 11x clamps
– |
Remove upholstery covering
|
|
|
|
|
11. |
Remove upholstery padding
|
Install
13. |
Attach upholstery covering
• |
Position upholstery covering
|
|
15. |
Attach head restraint guide sleeve
• |
Engage 4x head restraint guide sleeves (audible click)
|
|
16. |
Insert surrounding upholstery covering
|
17. |
Attach left and right brackets
|
18. |
Attach rear seat backrest cover
|
19. |
Install head restraints
|
20. |
Insert rear seat backrest
|
21. |
Install rear seat backrest
• |
Tighten 2x screws at back 20 Nm
|
• |
Fold down rear seat backrest
|
• |
Tighten 2x bolts, side 20 Nm
|
• |
Tighten 2x front bolts 20 Nm
Note: Use screw locking
compound
|
|
22. |
Insert rear seat cushions and lock
|
|