Replace moulded headlining (panorama glass) -
L08
Remove
2. |
Remove load compartment cover
• |
Unclip 2x retaining cords from tailgate (arrows)
|
• |
Pull out 2x covers from supports, side (1)
|
|
|
|
3. |
Remove A-pillar - left side
|
|
|
4. |
Remove A-pillar - right side
|
5. |
Remove B-pillar deflection sheave - left side
• |
Unscrew bolt
– |
Unclip deflection sheave cover (2)
|
|
|
6. |
Remove upper B-pillar inner panelling - left side
• |
Unclip 2x airbag panel clips (1)
|
• |
Unclip 2x B-pillar panelling clips with plastic wedge
|
|
|
|
7. |
Remove upper B-pillar deflection sheave - right side
• |
Unscrew bolt
– |
Unclip deflection sheave cover
|
|
|
8. |
Remove upper B-pillar inner panelling - right side
• |
Unclip 2x airbag panel clips
|
• |
Unclip 2x B-pillar panelling clips with plastic wedge
|
|
9. |
Remove upper C-pillar inner panelling - left side
• |
Unscrew C-pillar seatbelt fastening screws
|
• |
Unclip 3x C-pillar inner panelling clips
|
|
|
|
10. |
Remove upper C-pillar inner panelling - right side
• |
Unscrew C-pillar seatbelt fastening screws
|
• |
Unclip 3x C-pillar inner panelling clips
|
|
11. |
Remove rear seat interior light
• |
Disconnect wiring harness plug (1)
|
|
12. |
Remove interior light frame
• |
Bend up 8x fastening clamps
|
|
|
|
|
13. |
Remove 2x guide rail front fastening bolts
• |
Unscrew and remove bolt (arrow)
|
|
14. |
Remove 2x rear guide rail fastening bolts
|
|
15. |
Remove moulded headlining
Note: Screw in 2x bolts
in rear guide rail!
Note: 2nd mechanic
required! Avoid buckling during removal!
• |
Push front seat backrest completely to the rear
|
• |
Separate rear inner lighting wiring harness plug (1)
|
• |
Loosen 4x front velcro fasteners
|
• |
Remove moulded headlining
|
|
|
|
Install
16. |
Position moulded headlining
Note: 2nd mechanic
required!
Note: Avoid
buckling!
|
17. |
Install moulded headlining
Note: 2nd mechanic
required!
• |
Unscrew 2x rear guide rail bolts
|
• |
Join 4x Velcro fasteners
|
• |
Tighten 4x fastening bolts
|
• |
Position door seal cover lip left and right over moulded
headlining
|
• |
Connect rear interior light wiring harness plug
|
|
18. |
Install interior light frame
• |
Close 8x fastening clamps
|
|
19. |
Install rear seats interior light
• |
Connect wiring harness plug
|
|
20. |
Install upper C-pillar inner panelling - left side
• |
Clip in 3x C-pillar inner panelling clips
|
• |
Tighten C-pillar seatbelt fastening screws
|
|
21. |
Install upper C-pillar inner panelling - Right side
• |
Clip in 3x C-pillar inner panelling clips
|
• |
Tighten C-pillar seatbelt fastening screws
|
|
22. |
Install upper B-pillar inner panelling - left side
• |
Clip in 2x B-pillar panelling clips
|
• |
Clip in 2x airbag panel clips
|
|
23. |
Attach B-pillar defection sheave - left side
• |
Tighten bolt 30 Nm
– |
Clip in deflection sheave cover
|
|
|
24. |
Install upper B-pillar moulding - right side
• |
Clip in 2x B-pillar panelling clips
|
• |
Clip in 2x airbag panel clips
|
|
25. |
Install B-pillar deflection sheave - right side
• |
Tighten bolt 30 Nm
– |
Clip in deflection sheave cover
|
|
|
26. |
Install A-pillar moulding - Left side
• |
Clip in airbag panel in A-pillar
|
|
27. |
Install A-pillar - right side
• |
Clip in airbag panel in A-pillar
|
|
28. |
Install load compartment cover
• |
Engage 2x covers in supports, side
|
• |
Clip in 2x retaining cords to tailgate
|
|
30. |
Program volatile memories
|
|