Centre Parking Brake Cable, Remove and Install
(Vehicles with Drum Brakes)
Remove
1. |
Remove cover of diagnostic connection
|
2. |
Unclip bellows (2) for parking brake lever out of central
console and draw up to hand grip (1)
|
3. |
Slacken parking brake cable at parking brake lever by turning
back the adjusting nut (3).
|
|
|
5. |
Unclip parking brake cable (2) at connector (1)
|
6. |
Detach front exhaust pipe and central silencer
- except for Z 20 LEL
- Z 20 LEL
|
7. |
Detach heat shield of central silencer from vehicle
underbody
|
8. |
Twist front parking brake cable (5) 90° and detach from
parking brake cable compensator.
|
9. |
Detach parking brake cable from rear axle retainers, rear axle
bracket and fuel tank (6)
|
|
|
Install
10. |
Attach parking brake cable in retainers on rear axle, rear axle
bracket and to retainers (1) on fuel tank.
|
11. |
Hook front of parking brake cable (2) into parking brake cable
compensator and twist by 90° -
Note: Ensure that the
T-piece at the front end of the parking brake cable is seated
correctly in the parking brake cable compensator (arrow).
|
12. |
Push protective sleeve for front of parking brake cable (4) in
the direction of the parking brake cable compensator until it
passes over the bulge (3) on the parking brake cable
|
13. |
Clip parking brake cable in new connector.
|
14. |
Attach heat shield of central silencer (7) to vehicle underbody
2 Nm
|
15. |
Attach front exhaust pipe (5) and central silencer (6)
- except for Z 20 LEL
- Z 20 LEL
|
|
|
16. |
Fit rear wheels 110 Nm
|
17. |
Adjust parking brake lever path
|
|