|
Engine does not start, starter runs normal
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
|
|
Engine does not start, starter slow / does not turn
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Fuses
- Check the following fuses for proper operation:
FE18 Fuse
- If fuse FE18 is defective:
Data List
- Select the following Functional System on the diagnostic tester:
Instrument
- Check the following data list parameters:
Vehicle with Easytronic:
Programming
- Select the following control unit on the diagnostic tester:
UEC
- Perform the following programming:
Perform the following troubleshooting:
|
|
Engine stalls shortly after start
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
|
