Result
|
Cause Of Fault
|
E001
|
Result: Defective Component
|
- Short circuit to ground between:
A84 Control Unit - Engine Wiring harness connector (wiring harness side) terminal 28 (XC3) & B64 Sensor - Temperature, Intake Air Wiring harness connector (wiring harness side) terminal A
or
- Defective component:
B64 Sensor - Temperature, Intake Air
|
|
E002
|
Result: Short to Voltage
|
- Short circuit to voltage between:
A84 Control Unit - Engine Wiring harness connector (wiring harness side) terminal 28 (XC3) & B64 Sensor - Temperature, Intake Air Wiring harness connector (wiring harness side) terminal A
or
- Defective component:
A84 Control Unit - Engine
Important:
Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.
|
|
E003
|
Result: Interruption
|
- Circuit interruption between:
A84 Control Unit - Engine Wiring harness connector (wiring harness side) terminal 12 (XC3) & B64 Sensor - Temperature, Intake Air Wiring harness connector (wiring harness side) terminal B
or
- Defective component:
A84 Control Unit - Engine
Important:
Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.
|
|
E004
|
Result: Defective Component
|
- Defective component:
A84 Control Unit - Engine
Important:
Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.
|
|
E005
|
Result: Short to Voltage
|
- Short circuit to voltage between:
A84 Control Unit - Engine Wiring harness connector (wiring harness side) terminal 12 (XC3) & B64 Sensor - Temperature, Intake Air Wiring harness connector (wiring harness side) terminal B
or
- Defective component:
A84 Control Unit - Engine
Important:
Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.
|
|
E006
|
Result: Short to Ground/Interruption
|
- Short circuit to ground/interruption of circuit between:
A84 Control Unit - Engine Wiring harness connector (wiring harness side) terminal 12 (XC3) & B64 Sensor - Temperature, Intake Air Wiring harness connector (wiring harness side) terminal B
or
- Defective component:
A84 Control Unit - Engine
Important:
Reset the concerned control unit with the diagnostic tester before replacing it. In order to do that, call up the "RESET" function from the PROGRAMMING menu of the current system on the diagnostic tester.
|
|