|
Remove and install selector lever control unit
(AF40)
 Remove
|
| 2. |
Remove selector lever control unit (3)
| • |
Disconnect wiring harness plug of selector lever lock magnetic
switch (1)
|
| • |
Release (2) and remove selector lever control unit
|
|
|
Install
|
| 3. |
Install selector lever control unit (3)
| • |
Insert and engage control unit (2)
|
| • |
Connect wiring harness plug of selector lever lock magnetic
switch (1)
|
|
|
| 4. |
Install selector lever
|
| 5. |
Adjust selector actuation cable 
|
| 6. |
When replacing the selector lever control unit, "Program" with
TECH 2 after installation
|
| 7. |
Check selector lever safety functions
|
|
