vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Engine Coolant Fan Replacement - 2.0L Diesel LBS and LBX > < Engine Coolant Air Bleed Hose Replacement - 1.6L LLU

Astra J

Engine Coolant Fan Shroud Replacement (2.0L Diesel LBS and LBX)

Removal Procedure

1. Remove the radiator. Radiator Replacement .

           2028322


2. Disconnect the engine coolant fan resistor wiring harness plug (1).
3. Unclip all wiring harness retainer clips and remove the wiring harness (2).

           2699361


4. Remove the engine coolant fan shroud (1).

Disassemble Procedure


           1936663


1. Remove the engine coolant fan resistor (1) by unclipping the retainer clip (2).
2. Unclip the engine coolant fan resistor wiring harness (arrows).
3. Remove the 3 engine coolant fan motor bolts (3) from the engine coolant fan.
4. Remove the engine coolant fan.

Assemble Procedure


           1936663


1. Install the engine coolant fan.

Caution: Refer to Fastener Caution

2. Install the 3 engine coolant fan motor bolts (3) and tighten to 4 N·m (35 lb in) .
3. Clip in the engine coolant fan resistor wiring harness (arrows).
4. Install the engine coolant fan resistor (1) by clipping the retainer clip (2).

Installation Procedure


           2699361


1. Install the engine coolant fan shroud (1).

           2028322


2. Install the wiring harness (2) and clip in all retainer clips.
3. Connect the engine coolant fan resistor wiring harness plug (1).
4. Remove the radiator. Radiator Replacement .

Engine Coolant Fan Replacement - 2.0L Diesel LBS and LBX > < Engine Coolant Air Bleed Hose Replacement - 1.6L LLU