Astra J
Crankshaft Front Oil Seal ReplacementSpecial Tools
For equivalent regional tools refer to Special Tools . Removal Procedure
|
1. | Remove the crankshaft pulley. Refer to Crankshaft Pulley Replacement . |
Note: Do not damage sealing surfaces. |
2. | Remove the crankshaft front oil seal (1), using the EN-45000 remover . |
Installation Procedure
Note: Drive the crankshaft front oil seal in as far as the stop with the EN-656 installer . |
1. | Install the crankshaft front oil seal in oil pump cover, using the EN-656 installer (1) |
2. | Install the crankshaft pulley. Refer to Crankshaft Pulley Replacement |