Camshaft Removal
Special Tools
EN-6092-10 Fixing Tool
For equivalent regional tools, refer to
Special Tools .
| 1. |
Remove the camshaft bearing
front cap bolt (1). |
| 2. |
Remove the 2 camshaft bearing
front cap nuts (2). |
| 3. |
Remove the camshaft bearing
front cap (3). |
| 4. |
Install the
EN-6092-10 fixing tool (2) as shown in order to fix
the exhaust camshaft secondary gear (3) to the exhaust camshaft
gear (1). |
| 5. |
Remove the camshaft bearing
cap bolts and nuts in a sequence as shown one turn at a time until
there is no spring tension pushing on the camshaft. |
| 6. |
Remove the 8 camshaft bearing
cap nuts (2) and the 4 camshaft bearing cap bolts (1). |
|
Note: Mark the
camshaft bearing caps to ensure they will be installed in the same
position.
|
| 7. |
Remove the 4 camshaft bearing
caps. |
| 8. |
Remove the intake camshaft and
the exhaust camshaft. |
|
