vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

ABOUT US
Repair Instructions - Off Vehicle > < Engine Oil Level Indicator Switch Replacement

Astra J

Timing Belt Front Cover Replacement

Removal Procedure

1. Remove the camshaft position sensor. Refer to Camshaft Position Sensor Replacement .
2. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
3. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .

           2191998


4. Remove the protecting cover nut (1).
5. Remove the protecting cover washer (2).
6. Remove the protecting cover bolt (4).
7. Remove the protecting cover (3).

           2189428


8. Remove the 5 short timing belt front cover bolts (2).
9. Remove the 3 long timing belt front cover bolts (3).
10. Remove the timing belt front cover (1).

Installation Procedure


           2189428


1. Install the timing belt front cover (1).
2. Loosely install the 3 long timing belt front cover bolts (3).

Caution: Refer to Fastener Caution .
3. Install the 5 short timing belt front cover bolts (2) and tighten to 10 N·m (89 lb in) .
4. Tighten the 3 long timing belt front cover bolts (3) to 10 N·m (89 lb in) .

           2191998


5. Install the protecting cover (3).
6. Install the protecting cover bolt (4) and tighten to 10 N·m (89 lb in) .
7. Install the protecting cover washer (2).
8. Install the protecting cover nut (1) and tighten to 10 N·m (89 lb in) .
9. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
10. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
11. Install the camshaft position sensor. Refer to Camshaft Position Sensor Replacement .

Repair Instructions - Off Vehicle > < Engine Oil Level Indicator Switch Replacement