Clutch Actuator Cylinder Front Pipe Replacement (Left Hand
Drive - F40 MYJ)
Removal Procedure
2. |
Remove radiator surge tank
clip (2). |
3. |
Remove radiator surge tank (1)
and lay aside. |
4. |
Place basin underneath.
|
5. |
Clip clutch actuator cylinder
front pipe (1) out of 2 retainers. |
6. |
Open retaining clip
(2). |
7. |
Disconnect clutch actuator
cylinder front pipe from clutch actuator cylinder pipe
elbow. |
8. |
Remove 2 brake pressure
modulator valve bracket bolts (1). |
9. |
Open retaining clip
(arrow). |
10. |
Disconnect clutch actuator
cylinder front pipe (1) from clutch master cylinder. |
|
Note: For removal of
clutch actuator cylinder front pipe lift brake pressure modulator
valve bracket carefully.
|
11. |
Remove clutch actuator
cylinder front pipe. |
Installation Procedure
|
Note: For
installation of clutch actuator cylinder front pipe lift brake
pressure modulator valve bracket carefully.
|
1. |
Install clutch actuator
cylinder front pipe. |
2. |
Connect clutch actuator
cylinder front pipe (1) to clutch master cylinder. |
3. |
Close retaining clip
(arrow). |
4. |
Connect clutch actuator
cylinder front pipe (1) to clutch actuator cylinder pipe
elbow. |
5. |
Close retaining clip
(2). |
6. |
Clip clutch actuator cylinder
front pipe into 2 retainers. |
7. |
Install 2 brake pressure
modulator valve bracket bolts (1) and tighten to 20
N·m (15 lb ft) . |
8. |
Install radiator surge tank
(1). |
9. |
Install radiator surge tank
clip (2). |
|