Astra J
Clutch Actuator Cylinder Pipe Replacement (F40)Removal Procedure
|
1. | Remove the manual transmission. Refer to Transmission Replacement . |
2. | Remove the clutch actuator cylinder pipe connector (1) from the clutch housing. |
3. | Detach the clutch actuator cylinder pipe nut (3). |
4. | Remove the clutch actuator cylinder pipe (2). |
Installation Procedure
1. | Install the clutch actuator cylinder pipe (2). |
2. | Install the clutch actuator cylinder pipe connector (1) to the clutch housing. |
Caution: Refer to Fastener Caution . |
3. | Install the clutch actuator cylinder pipe nut (3) and tighten to 18 N·m (13 lb ft) . |
4. | Install the manual transmission. Refer to Transmission Replacement . |