Unclip folding cover (2) from frame and turn upwards. Press tip
switch (1) from selector lever.
For this, push a wire (3) – diameter approx. 2 mm/0.08 in.
– upwards carefully through guide for "Sport/Economy Program"
wiring harness and press tip switch out of bracket.
Unsolder both cables (1) from tip switch.
Install
Cover selector knob during soldering to avoid damage by
soldering tin. Solder both cables (1) to new tip switch.
Press tip switch into bracket, pulling wiring harness carefully
downwards. Clip folding cover into frame.
