Vauxhall Workshop Service and Repair Manuals

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when...

10

VARIANT - CODING. NOT PROGRAMMED

-

·   If, after replacement of the transmission control unit, the engine version was incorrectly programmed or not programmed at all, this trouble code appears and "F7" flashes in TECH 1 for version coding.

Effects:

·   Only TECH 1 menu "F7" can be selected (see F7: Programming / select relevant engine)

Note:

Control units for vehicles with diesel engines cannot be programmed.

If a pre - programmed transmission control unit is installed, always check the version.