Remove centre console - see operation "Centre Console, Remove and Install" in group "C". Disconnect wiring harness plug for Economy/Sport and Winter programmes (1 and 2).
Remove bulb with socket for selector scale illumination.
Press off selector actuation cable (4) from selector lever (3). Remove selector actuation cable (4) from console - to do this, unclip retaining clip (5).
Remove, Disconnect
Remove selector lever console from floor panel (4 bolts, arrows).
Tighten (Torque)
Attach selector lever console to floor panel - 10 Nm / 7 lbf. ft.
Install, Connect
Attach selector actuation cable to console and secure with retaining clip.
Press on selector actuation control cable at selector lever. Attach bulb with socket for selector scale illumination. Connect wiring harness plug for Sport and Winter programmes. Install centre console - see operation "Centre Console, Remove and Install" in group "C".
Remove, Disconnect 
Tighten (Torque) 
Install, Connect 