Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Eos (1F7) V6-3.2L (BUB) (2008)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Page 1832

Page 4
background image

-

Pull the control housing carefully off the camshaft seals.

A - Intake Camshaft

-

First remove bearing caps 1 and 13.

-

Remove bearing caps 3 and 11.

-

Remove bearing cap 7.

-

Loosen and remove bearing caps 5 and 9 alternately and in a diagonal sequence.

B - Exhaust Camshaft

-

First remove bearing caps 2 and 14.

-

Remove bearing caps 4 and 12.

-

Remove bearing cap 8.

-

Loosen bearing caps 6 and 10 in alternately and in diagonal sequence.

-

Carefully remove the camshafts and place them on a clean surface.

-

Remove the roller rocker levers together with support elements and place them on a clean surface. 

-

Ensure that the roller rocker levers and the support elements are not interchanged.

Installing

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Page 1832

[PREV PAGE] [NEXT PAGE]