Removing and installing relay plate

Note:

The relay plate with fuse box is located under the dash panel on the left-hand side. Removing the dash panel trim

• ‒ → Press securing clips -1- on left and right-hand side of relay plate in direction of arrow, until the retaining pins -2- on the clips can be pulled out of the recesses on the retainer -4-.
• ‒ Swing securing clips -1- forward and pull off relay plate pins -3-.
• ‒ Press left-hand retainer -4- outwards until the pin -5- is no longer engaged in the retainer and then unhook relay plate.

When installing the pin-5- and the retaining pins -2- must engage in the recesses in the retainer.