volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing control unit and hydraulic unit > < Assembly overview

Golf Mk6

Connecting brake lines from brake master cylinder to hydraulic unit
Connecting brake lines from brake master cylinder to hydraulic unit
   
On brake master cylinder:
A - Primary piston circuit of brake master cylinder to hydraulic unit.
 - Identification: union nut with thread M10 x 1
B - Secondary piston circuit of brake master cylinder to hydraulic unit.
 - Identification: union nut with thread M12 x 1
1 - From hydraulic unit to front left brake caliper.
3 - From hydraulic unit to rear right brake caliper
4 - From hydraulic unit to rear left brake caliper
  N45-10002
On hydraulic unit:
A - From hydraulic unit to primary piston circuit of brake master cylinder
 - Identification: union nut with thread M10 x 1
B - From hydraulic unit to secondary piston circuit of brake master cylinder.
 - Identification: union nut with thread M12 x 1
1 - From hydraulic unit to front left brake caliper.
 - Identification: union nut with thread M12 x 1
2 - From hydraulic unit to front right brake caliper.
 - Identification: union nut with thread M10 x 1
3 - From hydraulic unit to rear right brake caliper
 - Identification: union nut with thread M10 x 1
4 - From hydraulic unit to rear left brake caliper
 - Identification: union nut with thread M12 x 1
  N45-10041

Removing control unit and hydraulic unit > < Assembly overview