Golf L4-2.0L (AZG) (2004)
/Page-465003.png)
-
Correct differences if necessary.
-
It is possible to correct trim height imbalance for front axle by adding weight to top of strut tower through the engine compartment.
-
To correct trim height imbalance for rear axle add weight to top of strut tower through the trunk compartment.
For weight sand bags are suitable for example, approximately 10 kg (22 lb).
Vehicle data sticker
Explanation of the PR No. (factory codes) on the vehicle data sticker
Various suspension components are installed depending on engine and equipment level. They are indicated by the PR numbers (they are also known as
factory codes).
The suspension components installed on the front axle in the vehicle is documented on the vehicle data sticker with the relevant PR. number.
Example of a vehicle data sticker
In this example the vehicle is equipped with the standard suspension 1 GA - arrow - .
The PR No. can also be e.g. G08, G29, G46 G76 etc.
The vehicle data sticker is located in spare wheel well and in Maintenance booklet.
The PR numbers determine the specified value allocation for the vehicle.