volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing over-centre spring (LHD vehicles) > < Servicing clutch control

Passat (B3)

5-Speed manual gearbox 02A
Servicing clutch control
Assembly overview - Pedal cluster (LHD vehicles)
 
N30-0021
  • Locking clip
  • Pivot pin for clutch pedal
    • ◆ Knock out with drift
  • Mounting bush
    • ◆ Check for wear, renew if necessary
    • ◆ Drive out with drift 3121
    • ◆ Press in by clamping in vice, use vice clamps
  • Clutch pedal
    • ◆ Removing and installing
  • Retainer
    • ◆ Removing and installing => Page 30-14
 
N30-0021
  • Clutch operating rod/master cylinder
  • Seal
    • ◆ Always renew
  • Self-locking hexagon nut, 25 Nm
    • ◆ Always renew
  • Supply hose
  • Master cylinder
    • ◆ Removing and installing => Page 30-14
  • Over-centre spring
    • ◆ Removing and installing
      =>Page 30-6
  • Over-centre spring mounting
    • ◆ Install in mounting bracket
 
N30-0021
  • Mounting bracket
    • ◆ Always renew self locking securing nuts on mounting bracket to stud/brake servo -25 Nm-
  • Brake pedal

Removing and installing over-centre spring (LHD vehicles) > < Servicing clutch control